Whats what where from used

DCC NCE powercab is used with a SB3a
Sound Locos from Eureka(QSI)
Sound chips from Soundtraxx installed by myself
Point control will be Modratec and Peco motors

Wednesday, March 24, 2010

In progress project #5210...

Neeburn Turntable is getting a power bridge(Antons) and 3526 tests clearances.A new operators cab has been constructed from clapboard and OHS has insisted on hand rails for safety.But no vis workwear around here,but you must have an Indeminty form to gain access for photography.3616 sits on the almost completed Turntable just needs some air tanks

Saturday, March 20, 2010

Fannys in the Paint Shop

Whilst testing and checking running qualities #23 went very well before painting.Now that its been painted its running very rough.Will need to do a strip down clean paint off places that are unavoidable getting into when spraying.Still needs lining weathering and then dullcoating.Im happy with the result sofar.Kit assembly instruction are very sketchy.Good pic of 23 are hard to find.

Tuesday, February 9, 2010

Eureka 38 Chassis with Body removed for painting

I removed the body so as not to get any overspray on the the green paint. slightly weathered my Eureka 38 wheels.Once other projects finished I will add LED markers and a tender light,as seen on railpage.

Sunday, January 31, 2010

The Real 1033

This is what the model will look like once finished.1033 is located at the Thirlmere Rail heritage museam.My 10class will be Neeburn's shed shunter.

Chassis and motor testing